• AWS ER 2594 round bar
  • AWS ER 2594 forging
  • AWS ER 2594 sheet
  • AWS ER 2594 flat bar
  • AWS ER 2594 pipe
Home > Alloy steel > AWS ER 2594

AWS ER 2594

We can produce AWS ER 2594 stainless steel round rods, AWS ER 2594 forging,sheet,coil,and profiledstrip,Deformed steel,flat steel,mould,steel wire,have all specifications. With DuoNian production experience, strict control AWS ER 2594 chemical composition and AWS ER 2594 mechanical properties.From casting, forging, steel to hot and cold rolling process, heat treatment, etc, we have the control of professional engineers. We have advanced precision machining equipment, according to the requirements of users machining. in order to achieve the most satisfied with the user requirements.

Production specification

Round bar steel: 1mm to 3500mm
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.

 

Data Sheet:

ER 2594 

 
 

 

Weight % C Cr Ni Mo Mn Si P S N Cu W

ER 2594

0.03

max

24-27

8-10.5

2.5- 4.5

2.5

max

1 max

0.03

max

0.02

max

0.20- 0.30

1.5

max

1.0

max

   

Alloy ER 2594 is a superduplex welding wire.  The Pitting Resistance Equivalent Number (PREN) is at least 40, thereby allowing the weld metal to be called a superduplex stainless steel.  This welding wire provides matching chemistry and mechanical property characteristics to wrought superduplex alloys such as 2507 and Zeron 100 as well as superduplex casting alloys (ASTM A890). This welding wire is overalloyed 2-3 percent in Nickel to provide optimum ferrite/austenite ratio in the finished weld.  This structure results in high tensile and yield strength along with superior resistance to SCC and pitting corrosion.

    

Set the parameters to obtain a heat input of 10,000 -30,000 Joules/inch.  Pre-heat is not required.  The interpass temperature should be maintained at 300ºF max.  If post weld annealing is required this weld metal will require a higher annealing temperature than that required by the duplex base metal.

   

AVAILABILITY

Alloy ER 2594 is a stainless steel TIG, MIG and SUB-ARC wire used for welding. 

 

SPECIFICATIONS

AWS 5.9

ASME SFA 5.9

AWS ER2594

UNS S32750

    

TYPICAL MECHANICAL PROPERTIES

 

Material Ultimate Tensile Strength (psi) 0.2% Offset Yield Strength (psi)

Elongation  (%)

ER 2594 123,250 (850 MPa) 94,250 (650 MPa) 28

Related hot word search:AWS ER 2594 round bar AWS ER 2594 ,forging AWS ER 2594 ,AWS ER 2594 sheet,coil AWS ER 2594 ,AWS ER 2594 flat bar,pipe AWS ER 2594 ,AWS ER 2594 Lrregular

Prev:450EMZ
Next:AWS A5.9 ER2594