• 99.2Ti-0.2Pd Ti Alloy round bar
  • 99.2Ti-0.2Pd Ti Alloy forging
  • 99.2Ti-0.2Pd Ti Alloy sheet
  • 99.2Ti-0.2Pd Ti Alloy flat bar
  • 99.2Ti-0.2Pd Ti Alloy pipe
Home > Ti Alloy > 99.2Ti-0.2Pd Ti Alloy

99.2Ti-0.2Pd Ti Alloy

We can produce 99.2Ti-0.2Pd Ti Alloy stainless steel round rods, 99.2Ti-0.2Pd Ti Alloy forging,sheet,coil,and profiledstrip,Deformed steel,flat steel,mould,steel wire,have all specifications. With DuoNian production experience, strict control 99.2Ti-0.2Pd Ti Alloy chemical composition and 99.2Ti-0.2Pd Ti Alloy mechanical properties.From casting, forging, steel to hot and cold rolling process, heat treatment, etc, we have the control of professional engineers. We have advanced precision machining equipment, according to the requirements of users machining. in order to achieve the most satisfied with the user requirements.

Production specification

Round bar steel: 1mm to 3500mm
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.

 

99.2Ti-0.2Pd Ti Alloy
Our advantages

99.2Ti-0.2Pd properties and heat treatment forged piece, Including 99.2Ti-0.2Pd application and specifications, We have all specifications,Including 99.2Ti-0.2Pd steel plate, 99.2Ti-0.2Pd sheet, 99.2Ti-0.2Pd square steel, 99.2Ti-0.2Pd flat bar,99.2Ti-0.2Pd round bar,99.2Ti-0.2Pd forgings, we can own production and sales.


--------------------------------------------------------------------------------

Introduction to Our Products:

Specialized high quality steel

We have the advantages of equipment, technologies and price

forged/hot rolling/ extrusion of steel


--------------------------------------------------------------------------------

We can produce the 99.2Ti-0.2Pd has the following specifications:

Round bar steel: 1mm to 3000mm

Square-shape steel: 1mm to 2000mm

Plate steel:0.1mm to 2500mm

Width: 10mm to 2500mm

Lenth: We can supply any lenth based on the customer's requirement.

Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes

Tubings: OD: φ6-219 mm, with wall thickness ranging from 1-35 mm.

Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement

Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement

Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.

Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.

We serve you with our honesty, integrity, and professionality.


--------------------------------------------------------------------------------

Chemical composition % of the ladle analysis of grade 99.2Ti-0.2Pd and Standards

 

Category Titanium Alloy
Class Wrought
Type Commercially Pure
Designations United States: ASTM B265 Grade7, ASTM B348 Grade7, ASTM B381 Grade7

Composition
Element Weight %
Ti  99.2 
Pd  0.2 
 

 

Mechanical Properties
Properties  Conditions
T (°C) Treatment
Density (×1000 kg/m3) 4.51 25  
Poisson's Ratio 0.34 25  
Elastic Modulus (GPa) 102.7 25  
Tensile Strength (Mpa) 186 315 more annealed  
Yield Strength (Mpa) 110
Elongation (%) 37 
Reduction in Area (%) 75 
Hardness (HB) 200  25 annealed 
Impact Strength (J)
(Charpy) 43 25 annealed  

 

Thermal Properties
Properties  Conditions
T (°C) Treatment
Thermal Expansion (10-6/ºC) 8.6 20-100 more  

 


--------------------------------------------------------------------------------

Machining performance

Download 99.2Ti-0.2Pd the mechanical properties of the report, the report provides detailed performance analysis and application. Download >>


--------------------------------------------------------------------------------

Principal Design Features

One of the most widely used precipitation hardening grades in the business. While soft and ductile in the solution annealed condition, it is capable of high properties with a single precipitation or aging treatment. Characterized by good corrosion resistance, high harness, toughness and strength.


--------------------------------------------------------------------------------

Machinability

Long, gummy chips characterize this alloys machinability. It can be machined in the annealed condition, however condition H1150M will yield best results. Post machining solution treatment of parts will be required prior to final hardening if machining in this condition.


--------------------------------------------------------------------------------

Heat Treatment

CONDITION A--Soak at 1900 F (1038 C) for 30 minutes and cool below 60 F (16 C) for complete martensite transformation. CONDITION H 950- Treat Condition A material at 900 F(482 C) for 1 hour, air cool.. CONDITION H925, H1025, H1075, H1100, H1150- Soak solution treated material for 4 hours at specified temperature, air cool, CONDITION H1150M- Soak solution treated material at 1400 F (760 C) for 2 hours, air cool, then re-heat to 1150 F (620 C) for 4 hours and air cool.


--------------------------------------------------------------------------------

Welding

Successfully welded by common fusion and resistance methods, this alloy should not be joined by oxyacetylene welding. AWS E/ER630 filler metal is recommended if required.


--------------------------------------------------------------------------------

Forging

Soak for 1 hour at 2150 F (1177 C) prior to forging. Do not work below 1850 F (1010 C). Post-work solution treatment is required prior to final hardening.


--------------------------------------------------------------------------------

 

Hot tags:99.2Ti-0.2Pd steel plate, 99.2Ti-0.2Pd sheet, 99.2Ti-0.2Pd square steel, 99.2Ti-0.2Pd flat bar,99.2Ti-0.2Pd round bar,99.2Ti-0.2Pd forgings

 

Copyright © 1996-2011 Longhai Special Steel. All Rights Reserved.
Longhai steel is China's special steel inventory spot suppliers.  

The sender: ChenXueYang mobile: 13108107311;13881151869; Machine: 0816-3653779, 0816-3646884; Fax: 0816-3639422; QQ: 2286637323, E-mail: chinasteelsuppliers. Com
Stainless Steel | Mould steel | Heat resistant steel | Tool steel | Bearing steel | Spring steel | Alloy steel | Nickel base alloy and high nickel containing steels | Cementation steels | Free-cutting steels | Cold extrusion steels | Nitriding steels | Chain steels | Carbon steel | Ti Alloy | High temperature high strength alloy and high-temperature alloy | Low alloy high-temperature steel |


ASTMF136 h6-h9 ti alloy bar
 
 

 

Get Latest Price

FOB Price: US $ 50.6 / Kilogram
Port: shanghai/tianjin
Minimum Order Quantity: 10 Kilogram/Kilograms
Supply Ability: 40 Ton/Tons per Month
Payment Terms: L/C,T/T

Product Details Company Profile

Quick Details
Place of Origin: China (Mainland) Brand Name: XINNUO Model Number: XN20111208TB
Application: Medical Diameter: 4.76mm Shape: Round
Length: 2500-3000mm Technique: Rolled Grade: GR5 and Gr23
Characteristic 1: good biocompatibility Characteristic 2: non-ferromagnetic Characteristic 3: easy cleaning
Characteristic 4: high plasticity

Packaging & Delivery
Packaging Detail: plywood cases
Delivery Detail: 7-25 days after the contract take effect

Specifications
1.Grade: Gr5
2.Standard: ASTM F136, ISO5832-3
3. Size(mm): Dia4.76 * L(2500-3000)
4.MOQ:10KG
5.FOB:usd 50.6/kg

1.Grade: Gr5,Gr23
2.Standard: ASTM F136, ISO5832-3
3. Size(mm): Dia4.76 * L(2500-3000)
4.MOQ:10KG
5.FOB:usd 50.6/kg

6.Chemical composition:

Grade
 Ti
 Chemical  composition
 
Major  composition
 residual elements (not more than)
 
Al
 V
 Sn    
 Mo
 Pa
 Fe
 C     
 N
 H
 O
 
Gr5
 Bal
 5.5~6.75
 3.5~4.5
 /
 /
 /
 0.30
 0.08
 0.05
 0.015
 0.20
 
Gr23
 Bal
 5.5~6.5
 3.5~4.5
 /
 /
 /
 0.25
 0.08
 0.03
 0.0120
 0.13
 

 7.Mechanical properties:

Material
 Standard
 Tensile strength (Rm/Mpa)min.
 ElongationA% min.
 Reduction area Z/% min.
 Yield strength (Rp0.2/MPa) min.
 
Gr5
 ASTMF136
 930
 10
 25
 860
 
Gr23
 860
 10
 25
 795
 

8.Quality Inspection:

1) Ultrasonic and eddy current testing make sure the product without cracks and scratch,

2) The infra-red detector ensure the whole bar's diameter consistency,

3) Testing Tensile strength, yield strength and so on,

4) Each product is individually inspected before dispatch.

Related hot word search:99.2Ti-0.2Pd Ti round bar 99.2Ti-0.2Pd Ti Alloy,forging 99.2Ti-0.2Pd Ti Alloy,99.2Ti-0.2Pd Ti Alloy sheet,coil 99.2Ti-0.2Pd Ti Alloy,99.2Ti-0.2Pd Ti Alloy flat bar,pipe 99.2Ti-0.2Pd Ti Alloy,99.2Ti-0.2Pd Ti Alloy Lrregular

Prev:99.5 Ti Ti Alloy
Next:99.2 Ti Ti Alloy