• Ti-6Al-2Sn-4Zr-2Mo Ti Alloy round bar
  • Ti-6Al-2Sn-4Zr-2Mo Ti Alloy forging
  • Ti-6Al-2Sn-4Zr-2Mo Ti Alloy sheet
  • Ti-6Al-2Sn-4Zr-2Mo Ti Alloy flat bar
  • Ti-6Al-2Sn-4Zr-2Mo Ti Alloy pipe
Home > Ti Alloy > Ti-6Al-2Sn-4Zr-2Mo Ti Alloy

Ti-6Al-2Sn-4Zr-2Mo Ti Alloy

We can produce Ti-6Al-2Sn-4Zr-2Mo Ti Alloy stainless steel round rods, Ti-6Al-2Sn-4Zr-2Mo Ti Alloy forging,sheet,coil,and profiledstrip,Deformed steel,flat steel,mould,steel wire,have all specifications. With DuoNian production experience, strict control Ti-6Al-2Sn-4Zr-2Mo Ti Alloy chemical composition and Ti-6Al-2Sn-4Zr-2Mo Ti Alloy mechanical properties.From casting, forging, steel to hot and cold rolling process, heat treatment, etc, we have the control of professional engineers. We have advanced precision machining equipment, according to the requirements of users machining. in order to achieve the most satisfied with the user requirements.

Production specification

Round bar steel: 1mm to 3500mm
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.

 

Ti-6Al-2Sn-4Zr-2Mo Ti Alloy
Our advantages

Ti-6Al-2Sn-4Zr-2Mo properties and heat treatment forged piece, Including Ti-6Al-2Sn-4Zr-2Mo application and specifications, We have all specifications,Including Ti-6Al-2Sn-4Zr-2Mo steel plate, Ti-6Al-2Sn-4Zr-2Mo sheet, Ti-6Al-2Sn-4Zr-2Mo square steel, Ti-6Al-2Sn-4Zr-2Mo flat bar,Ti-6Al-2Sn-4Zr-2Mo round bar,Ti-6Al-2Sn-4Zr-2Mo forgings, we can own production and sales.


--------------------------------------------------------------------------------
Introduction to Our Products:

Specialized high quality steel

We have the advantages of equipment, technologies and price

forged/hot rolling/ extrusion of steel


--------------------------------------------------------------------------------

We can produce the Ti-6Al-2Sn-4Zr-2Mo has the following specifications:

Round bar steel: 1mm to 3000mm

Square-shape steel: 1mm to 2000mm

Plate steel:0.1mm to 2500mm

Width: 10mm to 2500mm

Lenth: We can supply any lenth based on the customer's requirement.

Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes

Tubings: OD: φ6-219 mm, with wall thickness ranging from 1-35 mm.

Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement

Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement

Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.

Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.

We serve you with our honesty, integrity, and professionality.


--------------------------------------------------------------------------------
Chemical composition % of the ladle analysis of grade Ti-6Al-2Sn-4Zr-2Mo and Standards

 

Category Titanium Alloy
Class Wrought
Type Near alpha alloy
Designations United States: MIL-T-9046, AMS 4975

Composition
Element Weight %
Al  6 
Sn  2 
Zr  4 
Mo  2 
 

 

Mechanical Properties
Properties  Conditions
T (°C) Treatment
Density (×1000 kg/m3) 4.54 25  
Poisson's Ratio 0.33 25  
Elastic Modulus (GPa) 113.8 25  
Tensile Strength (Mpa) 703 425 more duplex annealed  
Yield Strength (Mpa) 586
Elongation (%) 21 
Reduction in Area (%) 55 
Hardness (HRC) 32  25 duplex annealed 

 

Thermal Properties
Properties  Conditions
T (°C) Treatment
Thermal Expansion (10-6/ºC) 7.7 20-100 more  

 


--------------------------------------------------------------------------------

Machining performance

Download Ti-6Al-2Sn-4Zr-2Mo the mechanical properties of the report, the report provides detailed performance analysis and application. Download >>


--------------------------------------------------------------------------------

Principal Design Features

One of the most widely used precipitation hardening grades in the business. While soft and ductile in the solution annealed condition, it is capable of high properties with a single precipitation or aging treatment. Characterized by good corrosion resistance, high harness, toughness and strength.


--------------------------------------------------------------------------------

Machinability

Long, gummy chips characterize this alloys machinability. It can be machined in the annealed condition, however condition H1150M will yield best results. Post machining solution treatment of parts will be required prior to final hardening if machining in this condition.


--------------------------------------------------------------------------------

Heat Treatment

CONDITION A--Soak at 1900 F (1038 C) for 30 minutes and cool below 60 F (16 C) for complete martensite transformation. CONDITION H 950- Treat Condition A material at 900 F(482 C) for 1 hour, air cool.. CONDITION H925, H1025, H1075, H1100, H1150- Soak solution treated material for 4 hours at specified temperature, air cool, CONDITION H1150M- Soak solution treated material at 1400 F (760 C) for 2 hours, air cool, then re-heat to 1150 F (620 C) for 4 hours and air cool.


--------------------------------------------------------------------------------

Welding

Successfully welded by common fusion and resistance methods, this alloy should not be joined by oxyacetylene welding. AWS E/ER630 filler metal is recommended if required.


--------------------------------------------------------------------------------

Forging

Soak for 1 hour at 2150 F (1177 C) prior to forging. Do not work below 1850 F (1010 C). Post-work solution treatment is required prior to final hardening.


--------------------------------------------------------------------------------

 

Hot tags:Ti-6Al-2Sn-4Zr-2Mo steel plate, Ti-6Al-2Sn-4Zr-2Mo sheet, Ti-6Al-2Sn-4Zr-2Mo square steel, Ti-6Al-2Sn-4Zr-2Mo flat bar,Ti-6Al-2Sn-4Zr-2Mo round bar,Ti-6Al-2Sn-4Zr-2Mo forgings

 

Copyright © 1996-2011 Longhai Special Steel. All Rights Reserved.
Longhai steel is China's special steel inventory spot suppliers.  

The sender: ChenXueYang mobile: 13108107311; Machine: 0816-3653779, 0816-3646884; Fax: 0816-3639422; QQ: 2286637323, E-mail: chinasteelsuppliers. Com
Stainless Steel | Mould steel | Heat resistant steel | Tool steel | Bearing steel | Spring steel | Alloy steel | Nickel base alloy and high nickel containing steels | Cementation steels | Free-cutting steels | Cold extrusion steels | Nitriding steels | Chain steels | Carbon steel | Ti Alloy | High temperature high strength alloy and high-temperature alloy | Low alloy high-temperature steel

Related hot word search:Ti-6Al-2Sn-4Zr-2Mo Ti round bar Ti-6Al-2Sn-4Zr-2Mo Ti Alloy,forging Ti-6Al-2Sn-4Zr-2Mo Ti Alloy,Ti-6Al-2Sn-4Zr-2Mo Ti Alloy sheet,coil Ti-6Al-2Sn-4Zr-2Mo Ti Alloy,Ti-6Al-2Sn-4Zr-2Mo Ti Alloy flat bar,pipe Ti-6Al-2Sn-4Zr-2Mo Ti Alloy,Ti-6Al-2Sn-4Zr-2Mo Ti Alloy Lrregular

Prev:Ti-6Al-2Sn-4Zr-6Mo Ti Alloy
Next:Ti-6Al-2Sn-2Zr-2Mo-2Cr-0.25Si Ti Alloy